Features
- High-quality playback via HDMI, Bluetooth, Spotify, AirPlay and Loxone Radio
- Play local TV sources and share the sound throughout the home via Loxone
- Connection via Wi-Fi or LAN
- Compatible with every Loxone Miniserver
- HDMI ARC/eARC, Bluetooth, Spotify Connect and AirPlay can also be used without a Miniserver
- Easy configuration via the Loxone App
- Dolby Atmos certified surround sound at the highest level
Scope of delivery
- 1× soundbar
- 1× HDMI cable (1 m)
- 1× power supply
- 1× country adapter (EU, US, UK)
- 1× wall mounting kit
- 1× folder
Loxone Soundbar: home cinema that belongs to the smart home
The Loxone Soundbar is much more than a classic TV soundbar. It was specially developed for seamless integration into the Loxone smart home and combines high-quality home cinema with intelligent building automation. Whether films, music or TV, you enjoy impressive Dolby Atmos sound and distribute the sound throughout the building if you wish.
What sets it apart from other soundbars
The difference lies not in the sound, but in the connection. Unlike conventional soundbars, the Loxone Soundbar is controlled entirely via the smart home and fits into an existing audio system.
In practice, this means: volume, audio source, multiroom playback and automations run via the same app as lighting, shading and heating. So there is no additional remote control and no additional manufacturer app.
It can be operated via the Loxone App, and additionally via Touch or Remote Air. This means that switches and scenes can also access it, instead of audio remaining an isolated system.
Sound throughout the building
This is where the real added value of the integration shows, and there are two functions that stand out in everyday life.
The TV sound can be transferred automatically to other rooms. If you are in the kitchen while a match is on in the living room, you will not miss anything.
And music can be started in the living room and continued seamlessly on the terrace or in the kitchen. This is the classic multiroom case, just without a separate system, because the soundbar is part of the existing audio setup.
Both run via central operation in a single app and can be integrated into automations and scenes.
Can also be used without a Miniserver
One point that significantly extends the range of applications: the soundbar can also be used without a Miniserver as a high-quality premium soundbar.
So it is not a component that only makes sense with a complete installation. If you are planning to get started with the smart home, you can begin with the soundbar and add the integration later. Conversely, for an existing Loxone system it is the obvious building block for audio.
The technology
The system is designed as a Dolby Atmos certified 3-way sound system. Behind it are concrete values.
It has a 7-channel Class-D amplifier with 7 × 25 W RMS and 50 W peak power per channel. 125 mm woofers and 25 mm silk dome tweeters provide the playback; the frequency range extends from 48 to 20,000 Hz.
The RMS figure is the meaningful one: it describes the continuous power, while peak values are only present briefly. Seven channels with 25 W continuous power each are more than adequately dimensioned for a living room.
Connections and sources
HDMI 2.1 with ARC and eARC is provided for the TV connection. Via ARC, the sound runs from the TV back to the soundbar; eARC also transmits higher-resolution audio formats, which is relevant for Dolby Atmos.
So before ordering, check whether your TV has an HDMI port with ARC or eARC. With older devices this is not a matter of course, and the marking is usually right at the port.
For the network connection, Wi-Fi with 2.4 and 5 GHz and LAN with 10/100 Mbit are available. There is also Bluetooth 4.2. As music sources you use Spotify Connect, Apple AirPlay, Loxone Radio or Bluetooth.
In multiroom operation, LAN is the more stable choice, because several zones playing at the same time put more load on the Wi-Fi connection. You can find suitable material in our network section.
What is in the box
- 1 × Loxone Soundbar
- 1 × HDMI cable
- 1 × power supply
- 1 × country adapter (EU, UK, US)
- 1 × wall mounting kit
- 1 × documentation
So the HDMI cable and wall mounting kit are included; no accessories are needed for the basic installation. The power supply comes with country adapters, which is practical for holiday homes abroad.
Wall mounting or furniture
The wall mounting kit is included; the decision is yours. Below the TV on the wall, the soundbar sits at the same height and does not cover anything. On a sideboard it is set up more quickly, but depending on the height it may cover the lower edge of the picture.
In both cases, check whether the position matches the HDMI port of the TV so that the supplied cable is long enough.
The right environment
You can find further audio components in the Audio category. To expand the system, we carry Extensions and interfaces as well as matching power supplies.
The categories Loxone Products and Loxone Accessories and Spare Parts give an overview of the entire range.
Loxone Soundbar at Die Allroundbastler
Planning audio in the smart home or upgrading your TV sound? As a Loxone dealer, we carry the soundbar with Dolby Atmos, 7 × 25 W RMS and connection via HDMI eARC, Wi-Fi, LAN and Bluetooth. Delivery takes about 1 to 3 working days within Germany, and about 3 to 8 working days abroad. If you have questions about integration, we are happy to advise you. Contact us via our contact form, we will help you.
Flexible connection options
- HDMI 2.1 with ARC / eARC
- Wi-Fi (2.4 GHz and 5 GHz)
- LAN (10/100 Mbit)
- Bluetooth 4.2
- Spotify Connect
- Apple AirPlay
The connection can be made via Wi-Fi or via a wired network connection.
Technical data
| Supply voltage | 18–26 V DC |
| Power consumption | 1.8 W standby / 150 W peak power |
| Amplifier | 7 × 25 W RMS Class-D |
| Speaker system | 3.0 soundbar matrix |
| Frequency range | 48–20,000 Hz |
| Crossover frequency | 2,200 Hz |
| Woofer | 125 mm, cone made of coated kraft paper |
| Tweeter | 25 mm silk dome, polymer-coated |
| HDMI | 2.1 (ARC / eARC) |
| Network | LAN 10/100 Mbit, Wi-Fi 2.4/5 GHz |
| Bluetooth | Version 4.2 |
| Dimensions | 138 × 1100 × 102 mm |
| Weight | 7.9 kg |
| Degree of protection | IP20 |
| Operating temperature | -10 … 50 °C |
| Humidity | max. 95 % RH (non-condensing) |
| Power supply (included) | DC barrel connector 5.5 × 2.5 mm |
| Power supply input | 100–240 V AC, 50/60 Hz, max. 2.5 A |
| Power supply output | 24 V DC, 5.0 A |
| Power supply cable length | AC 110 cm / DC 140 cm |
















