Loxone Adapter Configurator for Intercom, NFC Code Touch and Touch Flex
For Loxone Intercom, NFC Code Touch and Touch Flex: In just a few steps to the right adapter from our own production – with sketch, parts list and price. Everything into the basket with one click. Our adapters are made for Loxone devices only – door intercoms from other manufacturers cannot be mounted with them. If you still have a Siedle, Ritto or Bticino system, you can convert it to Loxone with our adapter plates.
Loading the configurator …
Which adapter suits your installation?
Loxone Intercom, NFC Code Touch and Touch Flex have the same size and sit in the Loxone mounting frame. Together with our cover plates, up to three modules fit into one adapter – one above the other, two modules also side by side. Which adapter fits depends on where the cable comes out of the wall and what is already mounted on the wall.
The mounting types
- Directly on the wall: without a flush-mounted box, straight in the plastic weather protection housing or aluminium weather protection housing, or angled with the plastic angled adapter with weather protection or the aluminium angled adapter.
- Cable runs on the wall: For surface-mounted cables, for example in commercial buildings, there is the 25° angled adapter for surface-mounted installations for one device.
- New build: Our flush-mounted box is plastered in, and the straight or angled adapter is mounted on it.
- Old Loxone Intercom flush-mounted box: It stays in the wall. For new devices, the angled adapter or the straight adapter fit on it; for the old Intercom and Intercom XL there is the angled adapter for the old Intercom.
- Cable comes out too high or too low: The angled adapter for a cable that is too high compensates with 2.5° or 5°. If the cable comes out of the wall too low, the adapter for a cable that is too low routes it upwards in the lower frame.
Straight or angled – which angle?
When mounted at an angle, the camera and control panel face the front door or the visitor. 15° is subtle, 25° is our standard and 45° is strongly inclined. Two modules side by side are available angled at 15° directly on the wall. For a single NFC Code Touch or Touch Flex there is also the angled housing, which tilts the device upwards by 25°.
Plastic or aluminium?
Both versions come from our own production. Plastic is inexpensive and robust. We mill aluminium from a solid block and powder-coat it in-house – it is of higher quality, more durable and also available in RAL colours. The angled aluminium adapters always have weather protection; the double 25° adapter with increased weather protection is only available in aluminium.
When do you need the Loxone mounting frame?
In the weather protection housings and angled adapters, the devices sit in the original Loxone mounting frame – 1-gang, 2-gang or 3-gang, in silver or anthracite. If you already have it, simply leave it out in the configurator. For the adapter plates for Siedle Vario, Ritto Portier and Bticino Linea 3000 and for the old Intercom you do not need a mounting frame.
Converting Siedle, Ritto or Bticino to Loxone
The housing of the old door intercom stays in the wall; with our adapter plates you insert the Loxone devices directly into it: Siedle Vario flush-mounted, Siedle Vario surface-mounted 2-gang, Siedle GU 611-3/1-0 (angled at 25° or 45°), Ritto Portier 3000, Ritto Portier 2-gang as well as Bticino Linea 3000 2-module and 3-module. Depending on the frame, up to ten devices fit into Siedle Vario flush-mounted and Ritto Portier 3000; free slots get a blank module with blank cover.
Cover plates and accessories
You fill free slots in the mounting frame with a blank plate, a bell button, bell buttons with names or an illuminable house number or house number with names. Matching accessories are the limit switch, which reports when a device is removed, and the dismantling tool for the Loxone devices with glass front.
Order the Loxone devices at the same time
You do not have the Intercom, NFC Code Touch or Touch Flex yet? Then simply order them in the configurator as well – matching your adapter, in the version and colour of your choice. You can also find an overview under Access and security and Control.
Frequently asked questions
Which adapter fits if I mount directly on the wall?
Without a flush-mounted box you choose a straight weather protection housing – in plastic with 26 or 44 mm depth, in aluminium with 25 or 35 mm height – or an angled adapter with 15°, 25° or 45°. For a single NFC Code Touch or Touch Flex, the aluminium housing is also available with a glass door. The configurator above shows you the right version.
Can I convert Siedle, Ritto or Bticino?
Yes. For Siedle Vario flush-mounted and surface-mounted 2-gang, Siedle GU 611-3/1-0, Ritto Portier 3000 and 2-gang as well as Bticino Linea 3000 (2- and 3-module) there are adapter plates into which you insert Loxone Intercom, NFC Code Touch and Touch Flex. The existing housing stays in the wall.
Can I order the Loxone devices at the same time?
Yes. In step 1, answer the question “Do you already have the Loxone devices?” with “No, please order them too”. In the “Loxone devices” step you then choose the version – Intercom, NFC Code Touch (Tree, Air or for Nano) and Touch Pure Flex – and everything goes into the basket together with the adapter.
How do I order a Touch Pure Flex?
You design the Touch Pure Flex yourself at configurator.loxone.com. Click “Share” at the top there and paste the link into the configurator. Loxone makes every Flex to order according to your design, which is why it is excluded from the right of withdrawal.
Do I need the Loxone mounting frame?
For the weather protection housings and angled adapters yes – there the devices sit in the original Loxone mounting frame in 1-, 2- or 3-gang. For the adapter plates for Siedle Vario, Ritto Portier and Bticino and for the old Intercom you do not need one.
How many devices fit into one housing?
Up to three modules – devices and cover plates together – one above the other, two modules also side by side. Depending on the frame, up to ten devices fit into Siedle Vario flush-mounted and Ritto Portier 3000.
Which angle fits: 15°, 25° or 45°?
The larger the angle, the more the camera and control panel face the front door or the visitor. 25° is our standard, 15° is subtle and 45° is strongly inclined. Two modules side by side are available angled at 15°.
Plastic or aluminium?
Plastic is inexpensive and robust. Aluminium is of higher quality and more durable; we mill and powder-coat it in-house, also in RAL colours. Both come from our own production.
How long is the delivery time?
The adapters have a delivery time of approx. 1–3 working days, abroad approx. 3–8 working days. Loxone makes a Touch Pure Flex to order according to your design; it takes approx. 2–3 weeks. You can also see the current information in the parts list.