Five sensors in one device
The detector registers smoke, heat, motion, presence and brightness in one housing. This saves devices on the ceiling and installation effort.
Three modes per room
Smoke and heat combined, smoke only or heat only. This means it can also be used in the kitchen or bathroom without false alarms caused by steam or cooking fumes.
Networked alarm
If the Miniserver raises the alarm, all Smoke & Presence Detectors Tree and all Air detectors powered via 24 V sound the alarm too.
More than fire protection
- In the Loxone system, alarm, announcements, notifications and alarm chains work hand in hand.
- Doorbell with its own, quieter ringtone, e.g. for a workshop or garden shed.
- Temperature measurement for automations. As it is warmer at the ceiling, an offset can be set in Loxone Config.
- Tamper protection: if the detector is removed, you see it in the app.
Power supply
Operation with battery (up to 5 years) or with 24 V. The battery is always required, even with 24 V, so that smoke and heat detection continue to work in the event of a power failure.
Note
Under certain circumstances, the presence detector may also detect pets. The sensitivity is adjustable, but it does not distinguish between people and animals.
Features
- Autonomous smoke alarm operation with long-life battery
- Heat detector
- Optical smoke detection
- Presence and brightness sensor
- Visual and acoustic alarm
- Full integration with LOXONE Air
- Compact, discreet design for ceiling mounting
- Surface mounting without a cavity wall or flush-mounted box
Technical details:
9 … 30 V DC
105 x 28.5 mm / 4.13 x 1.12″ (D x H)
Specifications
Electrical specifications
| Supply voltage | 9 … 30 V DC |
|---|---|
| Power consumption | typ. 0.12 W |
| Power loss | max. 0.12 W |
| Battery | Ultralife 9V (U9VL) or Varta 6122 |
| Battery consumption | typ. 80 µW |
| Battery life | up to 5 years |
Smoke Detector Specifications
| Smoke detection | Tyndall effect (optical) |
|---|---|
| Max. monitoring area | Area up to 40 m² Height up to 5 m |
| Air velocity | max. 20 m/s |
| Sensitivity | typ. 0.15 dB/m |
| Alarm indication | visual (red LED) and acoustic (signal tone >85 dB(A)/3 m) |
| Heat alarm temperature threshold | 58 °C / 136.4 °F |
| Recommended service life | 10 years after activation |
Presence Detector Specifications
| Motion detection | passive infrared sensor |
|---|---|
| Motion detection range | Ø 6 m / 20 ft (at 2.4 m / 8 ft height) |
| Detection angle | horizontal 360 °, vertical 100 ° |
| Recommended installation height | 2.4 … 3.5 m / 8 … 11.5 ft |
| Max. installation height | 5 m / 16.5 ft |
| Brightness sensor measuring range | 0 … 32 000 lx |
| Acoustic detection | 60 Hz … 20 kHz, mono Max. sound pressure level (SPL): 160 dB Signal-to-noise ratio (SNR): 64 dBA |
Interfaces
| Loxone Air | 868 MHz (SRD band Europe), 4 channels, max. 15.1 mW e.r.p. 915 MHz (ISM band Region 2), 10 channels, max. 13.2 mW internal antenna |
|---|
Ambient conditions
| Temperature | 0 … 40 °C / 32 … 104 °F |
|---|---|
| Humidity | max. 95 % RH (non-condensing) |
| Degree of protection | IP20 |
Terminals
| Terminal type | DG220B |
|---|---|
| Conductor cross-section | 0.28 … 0.8 mm² / AWG 23 … 18 |
| Stripping length | 5 … 6 mm / 0.2 … 0.24” |
| Temperature resistance | -40 … 105 °C / -40 … 221 °F |
Product properties
| Colour | White: RAL 9003 / Anthracite: RAL 9005 |
|---|---|
| Gloss level | Matt |
Weight & dimensions
| Net weight | 140 g |
|---|---|
| Gross weight | 165 g |
| Product dimensions | 105 x 28.5 mm / 4.13 x 1.12″ (D x H) |
| Package dimensions | 145 x 108 x 30 mm / 5.71 x 4.25 x 1.18″ (L x W x H) |
Certifications & standards
| Standards | EN 14604:2005 |
|---|
Scope of delivery
- 1× Smoke & Presence Detector Air
- 1× Folder
