Features
- Cost-effective: dynamic three-phase AC charging from 4.1 to 11 kW
- Knows your car: recognises how much energy it needs and starts charging by itself (ISO 15118)*
- Energy management: charge for free with PV surplus, cheaply at spot prices and without overloading your house connection
- Built-in energy meter: Loxone Energy Meter 3-Phase Tree, MID-compliant
- Tree integrated: NFC Code Touch and Touch devices can be connected directly
- Future-proof: complies with EN ISO 15118-20 – prepared for bidirectional charging*
Scope of delivery
- 1× Wallbox 11kW 16A Air
- 1× Blanking cover
- 1× Cover
- 1× Transparent cover
- 1× Housing
- 1× Mounting frame
- 2× 6x28mm screws
- 6× 4x12mm screws
- 2× 2.5x10mm screws
- 1× 5m charging cable
- 1× Folder
- 1× Installation instructions
AC input (mains voltage)
| Rated voltage | 230/400 V |
|---|---|
| Rated current | 16 A |
24 V DC output
| Rated voltage | 24 V |
|---|---|
| Rated current | 100 mA |
Energy Meter 3-Phase Tree (100567)
| Measuring accuracy | MID / Class B EN 50470 / Class 1 IEC 62053 / Class 0.5 ANSI C12.1 |
|---|
Charging
| Charging power | 4.1–11 kW (3-phase) / 1.38–3.7 kW (1-phase) At 230 V per phase (400 V, 3-phase) and a power factor of 1. The actual charging power depends on the mains voltage and the vehicle’s on-board charger. |
|---|---|
| Charging current | 6–16 A, configurable |
| Phase switching | Not supported |
| Charging mode | Charging mode 3 (IEC 61851-1) |
| Residual current detection | Internal, RDC-MD, DC 6 mA, (IEC 62955) |
| Charging cable with plug | Type 2 plug (IEC 62196) Connection case C (permanently attached) 5.38 m cable 5 x 2.5 mm² + 1 x 0.5 mm² The charging cable may only be replaced with an original Loxone spare part. Other cable types or lengths must not be used. |
Interfaces
| Loxone Air | 868 MHz (SRD band Europe), 4 channels, max. 15.1 mW e.r.p. 915 MHz (ISM band Region 2), 10 channels, max. 13.2 mW internal antenna |
|---|---|
| Loxone Tree | Connection for up to 2 Tree devices |
| OCPP | 1.6 & 2.0.1, NFC Code Touch required |
Ambient conditions
| Temperature | -20 … 50 °C / -4 … 122 °F |
|---|---|
| Humidity | max. 95 % RH (non-condensing) |
| Degree of protection | IP44 (IEC 60529) |
| Impact resistance rating | IK08 (IEC 62262) |
| Operating altitude | max. 2000 m |
| Installation | Stationary, surface mounting, vertical on a wall or charging post |
| Recommended mounting height | Cable outlet: 132 cm / 52″ Top edge: 165 cm / 65″ |
Terminals
| Terminal type | AC input – PE AC input – L1, L2, L3, N DC output, Loxone Tree ASC 6 PE – A3C 1.5 |
|---|---|
| Conductor cross-section | 0.34 … 10 mm² 1.5 … 25 mm² Ferrules required for fine-stranded conductors 0.14 … 1.5 mm² |
| Stripping length | 12 mm 14 … 15 mm 8 mm |
| Temperature resistance | -60 … 130 °C -40 … 70 °C -60 … 130 °C |
| Tightening torque | – 3 N·m (Push-In) |
| Screw drive | 1.0 x 5.5 mm PZ2 (Push-In) |
Product properties
| Colour | Housing: RAL 9005 Decorative cover: RAL 9003 |
|---|---|
| Gloss level | Matt |
Weight & dimensions
| Net weight | 4.4 kg |
|---|---|
| Gross weight | 5.9 kg |
| Product dimensions | 430 x 190 x 130 mm (H x B x T) |
| Package dimensions | 575 x 395 x 155 mm (H x B x T) |
Certifications & standards
| Pollution degree | 3 |
|---|---|
| Standards | CE (LVD 2014/35/EU, EMCD 2014/0/EU) IEC 61851-1 IEC 61851-22 ISO 15118-2 ISO 15118-20 |
| Certifications | Compatible with ChargePoint be.ENERGISED (OCPP 1.6) OVE R37:2024 (AT TOR) |
