Features
- Cost-effective and as fast as possible: charging with 22 kW alternating current
- Easy installation thanks to the pre-installed Loxone Energy Meter 3-Phase Tree
- Charge for free: use PV surplus efficiently
- Electricity exchange included: charge cheaply even without a PV system – ideal for variable electricity tariffs
- Easy operation with the Loxone app or by adding a Touch Pure Flex or NFC Code Touch
- User identification and billing via NFC
- Fleet-ready: protection of the cable and the building thanks to optimal power distribution
- Up to 5 customisable charging modes
- OCPP-capable
- MID-compliant meter fitted at the factory
- Certified for TOR according to OVE R37:2024
Electrical specifications
| Rated voltage | AC input (mains voltage)24 VDC input3 x 230/400 V, 50 Hz18-24 V |
|---|---|
| Current | 3 x 32 Amax. 120 mA |
| Power consumption | Standby: 0.4 W Charging: 3 WStandby: 0.3 W Charging: 1.8 W |
| Total power loss | 6.9 W (when charging at 32 A / phase in the wallbox)-A 30 mA Type A residual current device (RCD) must be installed upstream of every wallbox. |
Energy Meter 3-Phase Tree (100567)
| Measuring accuracy | MID / Class B EN 50470 / Class 1 IEC 62053 / Class 0.5 ANSI C12.1 |
|---|
Charging
| Max. charging power | 22 kW (3-phase 32 A) adjustable from 4.1 kW to 22 kW |
|---|---|
| Charging mode | Charging mode 3 (IEC 61851-1) |
| Residual current detection | Internal, RDC-MD, DC 6 mA, (IEC 62955) |
| Charging cable with plug | Type 2 plug (IEC 62196) 5 metre cable, 5 x 4 mm² + 1 x 0.5 mm² |
Interfaces
| LOXONE Tree | Connection to Miniserver / Tree Extension |
|---|---|
| Modbus RTU | max. 1 device max. 3 m cable length adjustable baud rate & parity data types: 16 & 32 bit min. polling cycle: 0.1 s / 1 s |
| OCPP | 1.6 & 2.0.1, NFC Code Touch required |
Ambient conditions
| Temperature | -20 … 50 °C / -4 … 122 °F |
|---|---|
| Humidity | max. 95 % RH (non-condensing) |
| Degree of protection | IP44 (IEC 60529) |
| Impact resistance rating | IK08 (IEC 62262) |
| Protection class | Class I |
| Installation | Stationary, surface mounting, vertical on a wall or charging post |
| Recommended mounting height | Cable outlet: 132 cm / 52" Top edge: 165 cm / 65" |
| Operating altitude | max. 2000 m |
Terminals
| Conductor cross-section | 0.5 … 10 mm²1.5 … 25 mm² Ferrules required for fine-stranded conductors0.14 … 1.5 mm²0.25 … 0.75 mm² |
|---|---|
| Stripping length | 12 mm14 … 15 mm8 mm8 mm |
| Temperature resistance | -40 … 105 °C-40 … 70 °C-60 … 130 °C-60 … 100 °C |
| Tightening torque | 1.3 Nm3 Nm(Push-In) |
| Screw drive | 0.8 x 4 mmPZ2(Push-In) |
Wiring diagram

Product properties
| Colour | Housing: RAL 9005 Decorative cover: RAL 9003 |
|---|---|
| Gloss level | Matt |
Weight & dimensions
| Net weight | 4.4 kg |
|---|---|
| Gross weight | 5.9 kg |
| Product dimensions | 430 x 190 x 130 mm (H x B x T) |
| Package dimensions | 575 x 395 x 155 mm (H x B x T) |
Product dimension drawing

Certifications & standards
| Pollution degree | 3 |
|---|---|
| Standards | CE (LVD 2014/35/EU, EMCD 2014/30/EU) IEC 61851-1 IEC 61851-22 |
| Certifications | Compatible with ChargePoint be.ENERGISED (OCPP 1.6) OVE R37:2024 (AT TOR) |
