The FINDER coupling relay on a screw socket arrives at our warehouse fully assembled and is ready for immediate use. The combination of a series 46.52/61 relay and the matching series 45 (4C) socket makes installation on the DIN rail a matter of seconds. We regularly use this assembly ourselves in control and control cabinet projects – snap it on, clamp the wires and you are done. The factory assembly saves fitting the sockets individually and reduces wiring errors.
Product data at a glance
- Type: coupling relay
- Design: for DIN rail (TS35)
- Construction: with relay FIN 46.52 / 61
- Switching capacity: 16 A, 1 changeover contact (SPDT)
- Socket: series 45 (4C) with screw terminals and Faston connections
- Accessories included: LED EMC module, (dis)mounting clip, test button
- Maximum ambient temperature: +70 °C
- Dimensions: 15.8 mm width × 82.9 mm height × 64.6 mm depth
What convinces us about this version
The integrated LED EMC module shows the switching state at a glance and suppresses interference from the coil at the same time – two functions in one plug-in module. The test button on the relay allows a manual function test without control voltage, which considerably speeds up commissioning in the control cabinet. The (dis)mounting clip allows the relay to be separated from the socket without tools and without disconnecting the wiring. This is a practical advantage for maintenance or replacement during operation.
The series 45 (4C) socket offers both screw terminals and Faston connections. This covers both common wiring methods – screwed for classic control cabinet wiring or plugged with 6.3 mm flat connectors for pre-assembled cables.
Typical applications
With 16 A switching capacity and one changeover contact, the coupling relay is suitable whenever an electronic control signal is to switch a load with clean galvanic isolation. We mainly see it in the following applications:
- Control of contactors, solenoid valves or motor contactors from a PLC
- Separation between control circuit and load circuit in control cabinet construction
- Home automation and building technology, when a radio receiver or smart home module has to switch a 230 V load potential-free
- Machine controls, pump and fan controls
- Signal conversion between different voltage levels
Notes on installation
With a width of only 15.8 mm, the pre-assembled coupling relay also fits into densely packed control cabinets. It snaps directly onto a standard TS35 DIN rail. Before commissioning, we recommend checking the coil voltage against the control voltage in the circuit – the version of the FIN 46.52/61 relay is matched to the respective coil value. The maximum ambient temperature of +70 °C comfortably covers typical control cabinet operation; with tightly packed arrangements, sufficient ventilation should nevertheless be ensured
