Accessories for Presence Sensors

Loxone Accessories / Spare Parts

Loxone Replacement Plugs and Terminals

From €0.48

incl. VAT

plus shipping

Loxone Accessories / Spare Parts

Square Design Covers for Loxone Spots Gen. 2

€4.15

incl. VAT

plus shipping

Loxone Accessories / Spare Parts

Energizer Industrial Mignon AA (10 pcs.)

€14.64

incl. VAT

plus shipping

incl. VAT

plus shipping

€3.84

incl. VAT

plus shipping


Accessories for Loxone presence sensors

For the Loxone Presence Sensor Air, the Presence Sensor Tree and the Flush-Mounted Presence Sensor Tree you will find accessories from our own production here: surface-mount housings for surface mounting and cable ducts, adapters for wall, corner and sloping-ceiling mounting, frames and rings for ceiling installation, and original Loxone spare parts.

What do I need for what?

ItemUsed forSpecial featurePrice
Surface-Mount Housing 5 mmSurface mountingwhite or anthracite€3.84
incl. VAT plus shipping
Surface-Mount Housing 10 mmSurface mounting, e.g. next to cable ductswhite or anthracite€6.50
incl. VAT plus shipping
Surface-Mount Housing 18 mm – straightInserting a 15 × 15 mm cable ducttwo opposite knock-outs€6.55
incl. VAT plus shipping
Surface-Mount Housing 18 mm – 90 degreesInserting a 15 × 15 mm cable ducttwo knock-outs offset by 90°€6.55
incl. VAT plus shipping
Wall AdapterPresence sensor on the wall, also outdoorsfor Air and Tree, stainless steel screws€13.61
incl. VAT plus shipping
Outside Corner AdapterMounting on an outside cornerfor Air and Tree, also outdoors€24.22
incl. VAT plus shipping
Inside Corner AdapterMounting in an inside cornerfor Air and Tree, also outdoors€24.09
incl. VAT plus shipping
Roof Pitch AdapterPresence sensor on a sloping ceilingpitch selectable from 5 to 50°ab €22.22
incl. VAT plus shipping
Surface-Mount Adapter 55 mmFlush-mounted sensor as surface-mounted, also on sloping ceilingsalso 68 and 106 mmab €14.40
incl. VAT plus shipping
Surface-Mount Adapter, partially recessede.g. in solid wood ceilings22 mm surface height€11.78
incl. VAT plus shipping
Adapter RingCompensating for insufficient installation depth5 or 10 mmab €5.24
incl. VAT plus shipping
Housing for insulationInstallation in insulation or masonry120 × 120 × 50 mm€12.44
incl. VAT plus shipping
Adapter Frame outside 117 mmCovering a ceiling hole that is too largehole round 80–95 mm or square 80 × 80 mm€4.58
incl. VAT plus shipping
Adapter Frame outside 105 mmCovering a ceiling hole that is too largehole 86–100 mm€4.58
incl. VAT plus shipping
Spare Mounting PlateReplacing the holding plateoriginal Loxone spare part€6.55
incl. VAT plus shipping
Lens Cover Air / TreeMasking detection areasoriginal Loxone accessory€1.19
incl. VAT plus shipping
Lens Cover flush-mountedMasking detection areasoriginal Loxone accessory€1.19
incl. VAT plus shipping
Energizer Industrial AA (10 pieces)Batteries for the Presence Sensor Air1.5 V AA€14.64
incl. VAT plus shipping

Good to know

Surface mounting or cable duct

The surface-mount housings with 5 mm and 10 mm height are intended for surface mounting, for example next to cable ducts. The 18 mm housings have knock-out entries for 15 × 15 mm cable ducts, either opposite each other or offset by 90°.

On the wall and around the corner

With the Wall Adapter you mount the Presence Sensor Air or Tree on the wall, also outdoors. For corners there are the Outside Corner Adapter and the Inside Corner Adapter. For permanent direct sunlight we recommend the colour white.

Flush-mounted presence sensor

With the surface-mount adapters you turn the flush-mounted sensor into a surface-mounted one, for flat or sloping ceilings. If the installation depth is not enough, the Adapter Ring helps. For insulation or masonry there is a dedicated housing.

Withdrawal for roof pitch adapters

Adapters that we make to match your pitch angle are excluded from the right of withdrawal. Your statutory warranty rights remain unaffected.

Frequently asked questions

Do the wall and corner adapters fit Air and Tree?

Yes, all three fit the Loxone Presence Sensor Air and the Presence Sensor Tree.

Can I mount the presence sensor on a sloping ceiling?

Yes. For the Presence Sensor Air and Tree there is the Roof Pitch Adapter with 5 to 50°; for the flush-mounted presence sensor there are the surface-mount adapters with a roof pitch of 3 to 50°.

Which lens cover do I need?

With the lens cover you mask parts of the lens and thus exclude areas from detection. For the Presence Sensor Air and Tree use the Lens Cover Air / Tree, for the flush-mounted presence sensor the Lens Cover flush-mounted.

How quickly will my order arrive?

We usually ship items in stock on the day of the order (on Mondays for orders received by approx. 11 am, Tuesdays to Fridays by approx. 2 pm); delivery within Germany takes approx. 1–3 working days. If an item is not in stock in the quantity you want, we send the rest as quickly as possible and free of charge.

Your question was not answered?Write to us – we will be happy to help.

To the contact form